Where’s the job?

Overview

• Installing EV charging units—designed to safely and efficiently charge electric vehicles at home or in a workplace setting.

• Skill level: 3 / 5 (requires basic electrical knowledge, adherence to building regulations and careful wiring practices).

• Typical duration: 1 day for a standard installation, depending on the complexity of the existing electrical system.

Safety First

• Ensure compatibility with your home or office electrical supply and conduct a full circuit assessment.

• Isolate the power supply before commencing any installation work.

• Use RCD protection and ensure all wiring complies with current UK electrical standards.

• Follow manufacturer guidelines and local building regulations (Part P) to avoid non-compliance.

Tools & Materials

Step-by-Step

1. Assess your existing electrical capacity and consult your distribution board to ensure sufficient power is available.

2. Select a location – wall-mounted or pedestal units should be installed in close proximity to the vehicle parking area.

3. Mount the charger securely and route cables neatly, following manufacturer instructions for cable management.

4. Connect the charger to the power supply, ensuring the wiring, connectors and protective devices are rated for the current load.

5. Install a dedicated circuit with a suitable RCD and circuit breaker as per British Standards.

6. Test the installation using a multimeter to verify voltage levels, continuity and that there are no earth faults.

7. Finalise the set-up by commissioning the charger with a certified electrician and update any necessary registrations.

Completion Checks

• Charger activates correctly and displays proper connection status.

• Electrical testing confirms no voltage drop or earth faults in the circuit.

• All fixed wiring is tidy, secure and complies with local building regulations.

• Certification and final inspection have been completed by a registered electrician.

When to Call a Pro Instead

If the installation requires significant electrical panel upgrades, integration with smart systems, or you are unsure about compliance with Part P and BS7671 standards, it is advisable to hire a qualified electrician.