Where’s the job?

Overview

Installing glass splashbacks in kitchens and bathrooms creates a sleek, modern look while protecting walls from water and grease. This installation is ideally suited for areas behind sinks, stoves, and shower enclosures.

• Installing pre-cut or custom glass panels beneath cabinets and behind wet areas for easy cleaning and a stylish finish.

• Skill level: 3 / 5 (handling glass safely and ensuring a precise, level installation are essential).

• Typical duration: 2 – 4 hours for standard installations, depending on the size of the area and whether custom cutting is required.

Safety First

• Always wear protective gloves and eye protection when handling glass panels.

• Ensure the mounting surface is stable, clean and dry.

• Use the correct type of adhesive or fixings recommended for glass and the specific wall material.

• Avoid excessive force when positioning panels to prevent damage or breakage.

• If using drilling methods, double-check that the correct drill bits for glass or the backing material are in use.

Tools & Materials

Step-by-Step

1. Measure and plan – take precise measurements of the area where the splashback will be installed and order pre-cut panels or have glass cut to size.

2. Prepare the wall – ensure the surface is clean, dry and smooth. Remove any loose paint or debris.

3. Mark the layout – use a level and a pencil to mark where the edges of the splashback will align.

4. Apply mounting adhesive or tape – evenly spread the recommended adhesive on the marked area, or apply high-strength mounting tape as specified by the manufacturer.

5. Position the splashback – carefully align the glass panel with your markings and press it firmly into place.

6. Secure with fixings if required – if additional support is needed, pre-drill holes and use appropriate screws or brackets designed for glass installation.

7. Allow to cure – follow the adhesive manufacturer’s instructions for curing time before cleaning or applying any weight against the splashback.

Completion Checks

• The splashback is level, securely adhered and free from air pockets or visible gaps.

• Adhesive is cured and any excess has been cleaned off.

• Fixings, if used, are tight and the panel exhibits no movement when gently pressed.

• The finished work is inspected for cleanliness and overall visual appeal.

When to Call a Pro Instead

If the job involves complex cut-outs, unusual wall materials, or if you are unsure about handling heavy glass safely, it is wise to consult a specialist. A professional glass fitter can ensure correct installation, minimise breakage risk and guarantee a quality finish that complies with all relevant building guidelines.