Where’s the job?

Overview

• Installing panel fencing involves erecting fence panels, posts and gates to secure and beautify properties.

• Repair work encompasses replacing damaged panels, straightening posts and ensuring secure fixings.

• Skill level: 3 / 5 (requires precise measurement, use of power tools and understanding of fixing methods).

• Typical duration: 1 – 2 days for installation; repairs might take a few hours to a full day.

Safety First

• Wear appropriate personal protective equipment (PPE) such as gloves, eye protection and sturdy boots.

• Ensure ladders and scaffolding are secure when working at height.

• Check that all power tools are well-maintained and used with proper safety guards.

• Secure the area to prevent unauthorised entry, especially on busy work sites.

• For repairs involving sharp edges or heavy lifting, use caution to avoid injury.

Tools & Materials

Step-by-Step

1. Survey the site to determine fence layout and identify any obstacles or underground services.

2. Mark out post positions ensuring consistent spacing according to the design.

3. Install posts – dig holes, position posts and secure with concrete for stability.

4. Attach panel sections to posts using brackets and fixings; ensure panels are level.

5. For repairs, replace or reinforce damaged panels and tighten loose fixings.

6. Fit gates or access points, checking that hinges and latches work smoothly.

7. Finalise by cleaning the site and making sure all panels and posts are securely fixed.

Completion Checks

• Confirm that all panels are level, flush and securely fixed to posts.

• Check that gates and access points open and close without obstruction.

• Ensure any repaired sections blend seamlessly with existing panels for a uniform look.

• Clean the site and remove any debris, leaving the area safe and tidy.

When to Call a Pro Instead

If structural concerns, non-standard materials or planning regulation issues arise, it is advisable to engage a qualified fencing contractor or building professional to ensure compliance and durability.