Taps

🔧 Scope of Works Isolate  hot and cold feeds (service valves or main stop-cock) and depressurise the pipework. Empty the under-sink...

🔧 Scope of Works Isolate hot- and cold-water feeds at service valves or the main stop-cock and release pressure. Remove index cap or...

🔧 Scope of Works Turn off hot & cold supplies at local service valves or the main stop-cock and relieve pressure. Remove tap...

🔧 Scope of Works Isolate hot- and cold-water feeds to the Aqualisa mixer valve and depressurise the system. Strip down the mixer...

🔧 Scope of Works Turn off and drain hot & cold feeds (isolation valves or main stop-cock). Clear the pedestal/vanity unit for tool...

🔧 Scope of Works Isolate hot & cold supplies, depressurise and remove any existing tap/pipework. Enlarge or clean sink/work-top hole (if...

🔧 Scope of Works Isolate hot & cold supplies at service valves (or main stop-cock) and release pressure. Clear the under-sink cupboard...

🔧 Scope of Works Identify leak source  – spout, cartridge, gland, tail connections or supply hoses. Isolate hot & cold feeds (service...

🔧 Scope of Works Isolate cold & hot feeds at service valves or main stop-cock and relieve line pressure. Empty items stored under the...

🔧 Scope of Works Isolate hot & cold supplies and drain residual water. Remove bath panel (or tile trim) to expose tap tails and...

📝 Overview Swapping a broken or wobbly tap handle for a new like-for-like control without disturbing the valve body. Skill level: 2 / 5...

📝 Overview Swapping worn rubber washers in three separate compression taps to stop drips and restore a firm shut-off. Skill level: 2 / 5...

📝 Overview Stopping a persistent drip from an Aqualisa thermostatic or manual shower valve by replacing the cartridge and its...

📝 Overview • Swapping out an old basin pillar tap or monobloc mixer for a new like-for-like unit, including disconnecting supplies,...

📝 Overview • Installing an under-sink boiler tank and 3-in-1 monobloc tap that dispenses filtered near-boiling, standard hot and cold...

📝 Overview • Installing a brand-new monobloc kitchen mixer on a stainless-steel or composite sink, including mounting, connecting...

📝 Overview Stopping drips from the spout or leaks around the body of a kitchen sink tap by replacing the worn washer, O-rings or ceramic...

📝 Overview Removing an old monobloc mixer and installing a new one on a kitchen sink, including connecting flexi-tails and leak-testing....

📝 Overview Replacing existing bath pillar taps or upgrading to a single-lever mixer, including disconnecting supplies, fitting the new...