top of page
logo-2-NearMeTrades.png

Integrated Fridge Installation Guide

o3 / AI Assistant

01/10/25, 16:19

* This article may contain content generated by AI and may include errors. Learn more

Find the best tradesperson near me

Get 3 quotes in just 1 minute

Pink Poppy Flowers

Hi, what job do you need done today?

Where’s the job?

Your postcode ensures quotes are precisely tailored to your area.

Watch our Video Guide

banner_RAQ_desktop_bulletpoints.png

Integrated Fridge Installation Guide


Scope of Works

  • Pre‑visit survey & measure‑up – confirm niche size, hinge side and power socket position.

  • Disconnect & remove old appliance (if any) and safely isolate electrics/water if plumb‑in model.

  • Position new unit, level on adjustable feet and set correct ventilation gaps.

  • Fix cabinet door to fridge with slider or hinge kit; align reveals for a flush look.

  • Secure cabinetry & fit trim strips, seal service hole grommets, test door swing and magnetic seal.

  • Run‑up & performance check (temperature, light, alarm) and supply waste‑transfer note for the old unit.


Typical Cost (inc. VAT)

Charge type

Low £

High £

Notes

Call‑out / minimum

60

150

Appliance engineers typically charge £60‑£150 to attend; many quote ~£95 for integrated units CheckatradeWhitegoodsguy.co.uk

Labour per hour

30

60

Kitchen/appliance fitters £25‑£38 / h; general trades £40‑£70 / h HamuchCheckatrade

Materials

10

40

Door‑slider kit £7‑£9 + screws, trims, sealant eBay UK

Disposal

20

30

Retailer recycling charges £19.99‑£25 per old fridge AppliancesDirectJohn Lewis & Partners

Extras (cabinet mods)

120

250

New fridge‑housing or unit alteration ~£120+ per cabinet Checkatrade

TOTAL (most jobs come in here)

180

450

Single like‑for‑like swap, ground‑floor kitchen


Time on Site

  • Typical: 1 – 3 hours for a straightforward swap with existing housing.

  • Longer (½‑day): door reversal, tight access, plumb‑in water line or hard flooring to cut around.

  • Full‑day+: new cabinet build, electrical spur relocation, or multiple appliances in one visit.


Questions to Ask Your Trade

  1. Will you level and ventilate the fridge to the manufacturer’s spec (front‑to‑rear gap, grille cut‑outs)?

  2. What happens if the cabinet door doesn’t align – is minor carpentry included?

  3. Do you supply the slider/hinge kit, and is it compatible with my door thickness?

  4. Is recycling of the old fridge included and covered by a waste‑transfer note?

  5. What warranty do you give on workmanship and any parts you supply?

  6. How will you protect my flooring and worktops while manoeuvring the appliance?

  7. Are follow‑up call‑outs free if the door drops or the seal leaks within 30 days?


How to Avoid Surprises

  • Clear access & parking: leave a route wide enough for a 600 mm base unit and remove plinth sections.

  • Power & water ready: free socket within 1 m; isolate any mains water feed in advance.

  • Measure the new appliance – depth with plug and door thickness to ensure full door swing.

  • Vent kit & grille: order in good time if your kitchen brand uses bespoke parts.

  • Check flooring height: thick tiles or underlay can raise appliance above cabinet carcase.

  • Neighbour notice: in flats, book the lift and protect communal corridors for large‑box delivery.


All price ranges are rounded 2025 GBP figures and already include 20 % VAT.


02d882a4-ffe2-40d3-9100-c725a310c64e

bottom of page