Air conditioning tubing installation

gpt 5 mini
01/10/25, 12:14
* This article may contain content generated by AI and may include errors. Learn more
Find the best tradesperson near me
Get 3 quotes in just 1 minute

Watch our Video Guide

Scope of Works
• survey the route for refrigerant lines, condensate drain and cable runs
• measure, cut and prepare copper tubing and fittings, including flaring or brazing joints
• install thermal insulation and protective conduit, secure lines to walls, joists or rafters
• form and seal wall or roof penetrations, core drill where required and weatherproof external runs
• pressure and vacuum test the system, check for leaks and charge/reclaim refrigerant by an F‑Gas qualified engineer
• connect to indoor and outdoor units, run electrical isolator if required and complete commissioning checks
• remove and dispose of old tubing and contaminated materials following regulatory requirements
Typical Cost
Charge Type | Low £ | High £ | Notes |
|---|---|---|---|
Call-out / Minimum | £80 | £140 | first 30–60 min on site |
Labour per hour | £60 | £95 | qualified HVAC engineer rate |
Materials | £40 | £210 | copper tube, insulation, fittings; long runs increase cost |
Disposal | £30 | £120 | removal of old pipework and licensed refrigerant disposal |
Extras (e.g. scaffolding) | £80 | £600 | scaffold, cherry picker or hot‑works/fire watch where required |
TOTAL (most jobs come in here) | £300 | £1,100 | typical small domestic split-system tubing installation; complex jobs cost more |
Time on Site
Typical tubing runs for a single domestic split system take 2–4 hours on site; factors that extend it include long external runs, chasing walls or ceilings, need for scaffold or cherry picker, reclaiming old refrigerant, or waiting for parts
Questions to Ask Your Tradie
• are you F‑Gas certified and insured to handle refrigerant and provide paperwork
• what length of copper tubing, insulation and fittings are included in the quote
• will you perform vacuum and pressure tests and provide a leak test or commissioning report
• do you include sealing and weatherproofing of penetration points and who makes good after chasing
• what extras might be charged (scaffold, hot‑works permit, extended pipe runs) and how are they priced
• what guarantees cover workmanship and materials and do you provide documentation for future servicing
How to Avoid Surprises
• clear access to indoor and outdoor unit locations and mark where you want the pipe route
• arrange parking or loading space for van and materials close to the work area
• confirm if scaffold or working‑at‑height permits are needed for high external work
• move fragile items, protect carpets and floors, and secure pets during work
• check leasehold rules or building management requirements for external works or alterations
3daed988-e4d5-4b9a-91ac-2b07fe81e695

