top of page

Wheelchair Tyre Replacement Costs

o3 / AI Assistant

01/10/25, 16:19

* This article may contain content generated by AI and may include errors. Learn more

Find the best tradesperson near me

Get 3 quotes in just 1 minute

Where is the Job?

Step 1/3

Hi, what job do you need done today?

Where’s the job?

Your postcode ensures quotes are precisely tailored to your area.

Watch our Video Guide

banner_RAQ_desktop_bulletpoints.png

Wheelchair Tyre Replacement Costs


Scope of Works

  • Initial inspection & sizing – confirm wheel diameter, tyre type (pneumatic, solid, puncture‑proof), hand‑rim fit and valve orientation.

  • Remove wheel from axle or quick‑release hub; deflate and lever off old tyre / tube.

  • Fit new tyre (and tube if required) using plastic tyre irons and talc; align tread correctly.

  • Inflate to manufacturer PSI with calibrated pump or compressor; check concentric seating.

  • Re‑install wheel & adjust brakes to compensate for any diameter change.

  • Test roll & safety check – verify straight tracking, free spin and correct tyre pressure; provide usage advice leaflet.

Typical Cost (inc. VAT)

Charge type

Low £

High £

Notes

Call‑out / minimum

40

80

Includes first 15 – 30 min diagnostics

Labour per hour

45

70

Mobility‑equipment engineer 2025 rates

Materials (tyre, tube, sealant)

20

90

Pneumatic tyre £25; solid puncture‑proof £60‑£90

Disposal / environmental fee

0

20

Old rubber tyre recycling charge where applicable

Extras (pair of tyres, quick‑release spares)

30

110

Second tyre discounted; new push‑rim bolts, late‑evening visit

TOTAL (most jobs come in here)

120

320

One or two tyres/tubes replaced on‑site, incl. call‑out

Time on Site

  • Single tyre or tube: 30 – 45 minutes.

  • Pair of tyres or solid inserts: 45 – 90 minutes.

  • Extra time drivers: seized axle pins, adjusting drum brakes on attendant‑propelled chairs, or cleaning foam sealant residue.

Questions to Ask Your Trade

  1. Are the tyres OEM‑spec or third‑party, and what tread pattern options suit my usage?

  2. Is the call‑out fee deducted if I proceed with the quoted work?

  3. Will you balance or true the wheel after fitting solid inserts?

  4. How will you dispose of old tyres – is the recycling fee included?

  5. Do you carry the correct bore size inner tubes and valve types (Schrader vs. Presta)?

  6. What warranty applies to new tyres and your workmanship?

  7. Can you demonstrate correct tyre‑pressure checks and supply a recommended PSI chart?

How to Avoid Surprises 

  • Send wheel size & photos beforehand so the engineer brings the right tyre stock.

  • Clear access & parking: powered chairs can weigh 100 kg – ensure a level space close to the door.

  • Charge batteries overnight if the chair is powered; easier to test drive post‑fit.

  • Keep spare quick‑release pins handy in case originals are worn.

  • Check funding routes: Motability or NHS voucher schemes may cover tyres – confirm before authorising payment.

  • Get an itemised quote covering call‑out, labour blocks, tyre brand, disposal and VAT so your bill stays within the £120 – £320 range above.


9d7d2127-08ae-4fd8-a8b8-e048f1401553

bottom of page