Outdoor Socket Installation

Scope of Works

• Survey & test existing circuit, identify suitable feed or spur.

• Supply weather‑proof IP66 socket (single or double) with integral RCD if needed.

• Route cabling (surface trunking or drilled through wall) and fit fused connection unit indoors.

• Connect, seal and label all terminations; update circuit schedule.

• Test & issue minor works certificate, demonstrating RCD trip time and polarity.

• Demonstrate operation and leave installation tidy.
  

Typical Cost (inc. VAT)

Time on Site

A straightforward install takes 2 – 4 hours including testing; allow up to a full day if the feed must be run from a distant consumer unit or clipped along exterior walls, if masonry needs chasing, or if weather delays outdoor drilling. Checkatrade

Questions to Ask Your Trade

1. Are you NICEIC or NAPIT certified to issue a Minor Works certificate?

2. Will the new socket be protected by an RCD – in the unit or at the consumer board?

3. Where will you take power from and how will you route the cable?

4. Is the existing consumer unit capacity and earthing adequate for the extra load?

5. What is your call‑out and hourly rate after the first hour?

6. Do you include testing paperwork and Part P registration in the price?

7. How do you manage weather delays and will that affect cost?
   

How to Avoid Surprises

• Confirm clear access to consumer unit and exterior wall before arrival.

• Arrange parking or permits for the electrician’s van.

• Check for hidden services (pipes, data cables) where drilling is planned.

• Provide dry working area if rain expected; outdoor drilling in wet masonry may be unsafe.

• Advise if you need extra sockets or lighting later – cheaper as one visit.

• Ensure pets and children are kept clear of trailing leads and tools.

Figures are rounded 2025 estimates and include 20 % VAT.